OEM manufacturer 12-Strand Polypropylene Rope - Black 1″ x 30′ Kinetic Vehicle Recovery Tow Rope With High Strength – Florescence

Benefits of Using Florescence Offroad’s Kinetic Recovery Ropes over other recovery/tow equipment:

1. More Durable and Less Susceptible to Damage from Normal Wear and Tear

2. Decreased Shock Loads on Recovery Mounting Points

3. Superior Performance Recovering Larger Vehicles With Much Smaller Tow Vehicle

4. Superior Performance in Very Low Traction Situations

5. Light Weight and Portable

3.How to Correctly Use Your Kinetic Recovery Rope

Step 1: Verify your equipment is adequate for the use and in good condition.  A Kinetic Recovery Rope should be sized such that the Min. Breaking Load (MBL) is roughly 2-3 times the Gross Vehicle Weight.  To properly select a rope for your vehicle, follow the guidelines on the chart below.

Step 2: Securely attach rope to both vehicles – use a proper shackle or tow point.  Recovery points should be properly welded or bolted to the vehicle chassis.  WARNING: Never connect recovery equipment to a tow ball, as they are not designed for this type of load and can fail, causing serious damage.

Step 3: Ensure all bystanders are well clear of the area.  No person should be within 1.5xthe rope length of either vehicle, unless inside one of the vehicles.

Step 4:  Tow the stuck vehicle out.  The towing vehicle can start with slack in the tow rope and drive up to 15mph max. WARNING: Do not exceed 15MPH with a properly sized rope.  WARNING: Do not pull in a direction that would side load your recovery points unless they are specifically designed to handle side loads; most are not.  Continue to pull on stuck vehicle until no longer stuck.

Step 5:  Unhook and stow your rope.